HomeNewsIndia NewsRecom Switching Regulators to Supply Microprocessors From 4-20ma Loop

Recom Switching Regulators to Supply Microprocessors From 4-20ma Loop

RECOM new R420-1.8/PL switching regulators were developed specifically for supplying microprocessors from 4-20mA loop. Characteristics of the flat module include extremely low idle power along with high efficiency.

As aged as it may be, the venerable analogue 4–20mA loop still represents the undisputed standard in process and control technology – not least due to the relatively simple two-wire technology, which is extremely reliable and easy to install. Supplying digital components from the unused portion of the loop current had become an issue with microprocessors processing raw data and HART (Highway Addressable Remote Transducer) modems ensuring that smart sensors keep sending a variety of data signals on the same loop.

Conventional switching regulator ICs are unsuitable as their high efficiency at full load drops so far at lower loads that they exceed the 4mA threshold. Low quiescent current in sleep mode cannot compensate as this shuts off the main output voltage altogether. Linear regulators are not ideal either; despite their perfectly decent quiescent current levels at around 0.5mA, poor efficiency decreases available power by a factor of around three compared to switching regulators.

RECOM newly developed R420-1.8/PL switching regulators come with a particularly clever solution and a novel topology capable of lowering idle current to around 100μA while still maintaining rated voltage at output. For example,  24VDC and <3.5mA at the input provides 3.3V and 10mA at the output, which is capable of supplying the sensor alongside the microcontroller and HART modem without affecting loop functionality or metering accuracy.

Another benefit is that these new switching regulators are programmable for any output voltage between 1.8V and 5V by simple wiring using a resistor, yielding a single component suitable for a variety of tasks in process automation or sensor-controlled, solar-powered systems. The new R420-1.8/PL features an open-frame SMD design, operates at temperature range from -40°C to +105°C, and operates at an altitude of up to 5,000m. The regulator is permanently protected against short-circuit, and comes with a three-year warranty.

Samples are available from all of RECOM´s global distributors. For more information please visit www.recom-power.com

ELE Times Bureau
ELE Times Bureauhttps://www.eletimes.ai/
ELE Times provides a comprehensive global coverage of Electronics, Technology and the Market. In addition to providing in depth articles, ELE Times attracts the industry’s largest, qualified and highly engaged audiences, who appreciate our timely, relevant content and popular formats. ELE Times helps you build awareness, drive traffic, communicate your offerings to right audience, generate leads and sell your products better.

Related News

Must Read

35 Years of Innovation from Jena: GÖPEL electronic Celebrates Its Anniversary

From a Jena-based spin-off to a globally sought-after test...

Applied Materials Announces Broadcom as EPIC Innovation Partner

Companies to collaborate on R&D to accelerate the introduction...

Gartner Forecasts Worldwide AI Spending to Grow 47% in 2026

$2.59 Trillion in AI Spending Excels by Vendors and...

Infineon CoolGaN BDS Chips Splash Portable Power Footprint by 82%

Infineon Technologies AG expands its CoolGaN BDS 40 V...

DEFTECH Bharat 2026 Concludes Successfully, Sets Stage for Expanded 2027 Edition at BIEC

DefTech Bharat successfully concluded its 2026 edition in Bengaluru,...

Keysight Enables End-to-End Electrical-Optical-Electrical Simulation for Data Center and Ethernet Design

Keysight Technologies today introduces an Electrical-Optical-Electrical (EOE) simulation solution...