Design

Brushed DC Motor Driver with speed control and stall detection: Reference Design

Description This reference design demonstrates a brushed DC (BDC) motor driver solution for a vacuum robot main wheel and main brush, which can detect a...

Advancing battery management for healthcare energy storage systems

Abstract Battery monitoring systems are fundamental enablers of different markets. Batteries play a key role in a range of applications, from going the extra mile...

Two Terminal Bipolar Power Supply: Reference Design

Introduction A 2-quadrant power supply—one that provides a positive or negative voltage to the same output terminals—can easily be produced using the LT8714 4-quadrant controller....

Non-magnetic AC/DC power supply: Reference Design

When creating an industrial power supply, one of the most common challenges is transforming the AC voltage supply into a DC voltage supply. Changing...

Enabling condition-based monitoring solutions with Sensor performance

Advancements in semiconductor technologies and capabilities are enabling new opportunities to sense, measure, interpret, and analyze data in industrial applications and, in particular, condition-based...

PCB for low-EMI DC/DC converters: Working & Design

Every switch-mode power supply presents a wide-band noise source. Integrating a DC/DC converter from the car board net into an automotive control unit and...

Multi-rail TV Power Supply With Flexible Partitioning to Maximize Power Savings: Working & Design

Description The TIDA-050027 reference design is a power distribution solution for television (TV) platforms. By providing a configuration that emulates common voltage rails and peripherals,...

15-W Dual-Isolated Output Bias Power Supply With 4- mW Zero Standby Power Consumption: Working &...

Description This reference design is a 15-W bias power supply with two isolated outputs (12 V/1.125A and 3.3 V/0.3A) and a total standby power consumption...

Wide-bandgap semiconductor switches optimized to meet EMI compliance: Working & Design

EMI compliance is becoming a major concern for advanced power electronics due to increasing switching speeds. Correlated time-frequency measurements help optimize gate driving and...

40-V Isolated Comparator-Based Power Supply: Working and Design

Description This reference design demonstrates a cost-focused approach of an isolated power supply with low current capability. The design consists of three options of...

Small-Footprint Sunroof Motor Module: Working and Design

Description The TIDA-01389 is a small-footprint motor control module intended for sunroof and window lift applications. This TI Design uses the DRV8703-Q1 gate driver with...

Cost-Effective In-Vehicle Infotainment System Reference Design

Description This automotive reference design is based on TI’s Jacinto DRA71x processor and focuses on system level cost savings. The six-layer design reduces PCB costs...

Automotive 77-GHz Radar Module Reference Design with Object Data Output

Description The automotive camera reference design offers a complete solution for a 76-GHz to 81-GHz radar sensor module. The onboard power supplies convert the automotive...

Automotive Brushed Motor Drive for Power-folding side mirrors: Design and Working

Description This TI Design features the DRV8801EVM and the DRV8872EVM. These evaluation modules (EVMs) enable an easy-to-use platform to demonstrate the capability and performance of...

Isolated RS-232 with Integrated Signal and Power Reference Design

Description This TI Design provides a compact solution capable of generating isolated DC power while supporting isolated RS-232 communication. The TIDA-01230 consists of a reinforced...

Related News