Multi-Decade Design Simplifies Current Monitoring
Using a DMM on fixed ranges can be frustrating, but this simple design idea allows current monitoring from μA to over 100mA in a...
Thermocouple Signal Conditioning: Challenges and Solutions
The thermocouple is one of the oldest and most widely used components for measuring temperature. Thermocouples are generally found in applications that require temperature...
Remote Tuner Architecture
In a traditional radio architecture, wiring four antennas to the radio head unit requires up to 20 meters (60 feet) of copper cables. A...
Smart Metering Making-Way to a Smart City
Smart Grids - an overview
Governments and power companies across the world have recognized that the traditional grid, which has not significantly changed in 100...
Brain-Computer Interface Detects Patient’s Thoughts and Responses
A non-invasive brain-computer interface detects completely locked-in patients’ responses by measuring changes in blood oxygen levels in the brain.
With a goal of allowing patients...
Surge in LiDAR Sensors as Vehicles Going Autonomous
Various driving functions such as obstacle detection, and simultaneous localization and mapping (SLAM) are predicted to steer the adoption of LiDAR sensors in automobiles....
Market Landscape and SoC Trends of Wearable Sports Technology
A review of the benefits, applications, and System-on-Chip (SoC) technical trends in the area of wearable sports and fitness technology. Wearable solutions such as...
Touch sensor converter with 8 sensing channels for Smart Home, Automotive Applications
The LC717A30UJ uses mutual capacitance to detect capacitance changes down to femtofarad (fF) levels.
With the increasing demand for touch technology for consumer electronics as...
Power Loss Estimate with Correct Snubber
Your customer is worried. He believes the resistor in your voltage regulator’s snubber network is overheating and suspects it is causing reported field failures....
Global accelerators excited to be part of Indian Start-ups
The challenge in India is to figure out what steps you need to take to turn a prototype into a product and launch it...
