HomeNewsIndia NewsMurata’s ‘Micro-heater’ - smallest class in the industry for beauty and health...

    Murata’s ‘Micro-heater’ – smallest class in the industry for beauty and health appliances

    Murata commercialized the “Micro-heater” – the world’s smallest class (1.6 × 0.8× 0.68 mm) of ultra-miniature ceramic heater used as a PTC thermistor for a heater, and commenced mass production in November 2016. This product is to be exhibited at Murata’s booth at “Medtec Japan 2017,” which is scheduled to commence on April 19.

    Along with the heightened interest in health care, and the increasing diversification of health appliances and electrical beauty appliances, components used for a heater function are required to have a high degree of mounting freedom and also the ability to effectively heat the necessary location. In order to meet these needs of the market, Murata developed the “Micro-heater” ultra-miniature chip ceramic heater of size 1.6 × 0.8× 0.68 mm, which consists of a heater PTC thermistor encapsulated in insulating resin.

    Because this device is small, it has high heat response. Also, because the flat top surface, which has high electrical insulation, is placed into intimate contact with the mounting surface, it is possible to directly and efficiently heat the necessary location. In addition, if multiple devices are arranged side by side, it is possible to create heaters of various shapes, and also contribute to greater freedom of design.

    Because this device generates heat using only a low voltage, electric power can be used without waste. This energy-saving design also enables the device to be powered by a dry battery (1.5 VDC). Also, because of the self-temperature control function possessed by PTC ceramic material, the temperature does not rise significantly higher than that near the Curie point, so it can be said that this device is simple and also very safe.

    Application

    • Health care and health appliances
    • Beauty appliances
    • General electronic appliances
    • Temperature compensating circuit employing heating

    Features

    • Ultra-miniature: 1608 size
    • High temperature response
    • Has a high degree of mounting freedom, and efficiently heats the target location.
    • Wastes little electric power, and can also be powered by a dry battery (1.5 VDC).
    • High degree of safety due to the self-temperature-control function of PTC ceramics.

    Electric characteristic

     Item Specification
    Resistance at 25℃ 2.2 – 68 ohm (7 types)
    Curie point 85 – 105 °C
    Max voltage 2 – 6 V
    External size 1.6 × 0.8 × 0.68mm

    http://mail.murata.com/ep0lbZ01000EMH0108YjT0B

    ELE Times Bureau
    ELE Times Bureauhttps://www.eletimes.ai/
    ELE Times provides a comprehensive global coverage of Electronics, Technology and the Market. In addition to providing in depth articles, ELE Times attracts the industry’s largest, qualified and highly engaged audiences, who appreciate our timely, relevant content and popular formats. ELE Times helps you build awareness, drive traffic, communicate your offerings to right audience, generate leads and sell your products better.

    Related News

    Must Read

    What is Fashion Tech? Providing New Product Value and Customer Experiences with Technology

    Courtesy: Murata Electronics What is fashion tech? - diverse technologies...

    Emergency Screaming Detection: How AI Recognizes Human Screams and Saves Lives

    Courtesy: Renesas Detecting human screams for help is important in...

    India’s Electronics Push: Ambition Is Clear. Execution Will Decide the Outcome

    India’s electronics story has entered a decisive phase. The...

    India on the Road to Semicon Self-Reliance with Three More Plants

    India to welcome three more semiconductor plants after PM...

    Upcoming years to Bring Boom for Semiconductors and Electronics

    Union Minister for Electronics and Information Technology Ashwini Vaishnaw...

    R&S Propels 6G Readiness With FR1–FR3 Carrier Demonstration

    Rohde & Schwarz and Qualcomm Technologies, Inc. have reached...

    ROHM and Suchi Semicon Establish a Strategic Semicon Manufacturing Partnership in India

    ROHM and Suchi Semicon have announced the establishment of...

    Keysight to Demonstrate NR-NTN devices Mobility Testing at MWC 2026 in Collaboration with Samsung

    Keysight Technologies, Inc. will demonstrate lab-based validation of new...

    ROHM Strengthens Supply Capability for GaN Power Devices

    Combining TSMC’s Process Technology to Build an End-to-End, In-Group...