The latest Han® 300 A module fits in with the classic development goal for energy storage systems by enabling more capacity with less weight. Today’s energy storage systems often work with outputs of 200 A / 800 V DC. Future applications with higher energy density will require transmissions of 300 A / 1200 V DC and more. The Han® 300 A module is the matching interface.
The Han ® 300 A module is suitable for connecting new energy storage units, as well as for
upgrading existing systems (being plug-in compatible with the Han® 200 A module).
Equipped with touch-safe contacts, it can be connected directly to the busbar or integrated
into storage drawers.
The M12 connector format is new to the Han-Modular® range. Two connectors, either X-
or D-coded, each fit into one module. In this way, for example, it is possible to integrate 10
Gbit/s Ethernet into a modular interface in a particularly compact, space-saving manner.
By comparison with conventional RJ45 solutions, the M12 interface is significantly more
robust. All common bus systems can be easily adapted, including Profibus, Profinet, CAN,
Ethernet Cat. 5 and Cat. 6A.
The trends towards greater digitization and modularization will also continue to grow: The
Han ® Shielded Power Module represents a space-saving and easy-to-maintain alternative
to hard-wired shielded power cables. The module features three power contacts (16 A/400
V) and is suitable for connecting frequency-controlled drives, for example. Moreover, the
series has also been supplemented with an EMC-protected module for signal
transmission: with a large-area shield transfer and a 360° shield plate, the Han® Shielded
Module Basic not only offers good shielding but also enables a great deal of transmission in a compact installation space. Up to 27 shielded D-Sub contacts with 4 A/32 V can be
plugged in.
There are already several solutions for 360° shielded data transmission in the Han-
Modular ® program, including the Han® Megabit module, among others. A new feature,
however, is an adapter for the module that allows it to be plugged onto printed circuit
boards. The module features 8 data pins and a shield contact and enables Ethernet
transmission with two lines according to Cat. 5 or with one line according to Cat. 6A.
Introducing the Han ® Pneumatic Double Module, a new HARTING connector for
compressed air transmission will be launched in the current quarter. The contacts of the
interface have a larger connection range of 8 or 10 mm. This enables the design of
compressed air transmission with sufficient capacity to operate valve terminals for various
consumers.
What’s more, the double module is also easy to assemble: A push-in solution using the
proven quick connection technology and alternatively a conventional pneumatic
connection are available for the hose connection. The combination can be inserted into
the module – tool-free. With this module, HARTING is now further expanding its range of
compressed air interfaces: Systems with internally and externally calibrated pneumatic
tubing of 3, 4, 6, 8, or 10 mm can now be reliably installed with the help of pneumatic
modules.
For more information, visit www.harting.com
