HomeNewsIndia NewsHigh-Power Electronic Fuse introduced, for flexible and convenient protection

High-Power Electronic Fuse introduced, for flexible and convenient protection

Sustaining up to 4A continuous current over a wide operating input-voltage range of 8V to 48V, with low insertion loss thanks to its integrated low-RDS(ON) VIPower MOSFET, the STEF01 programmable electronic fuse from STMicroelectronics extends the benefits of fast-acting overload protection to applications at higher power ratings.

When connected in series to the main power rail, the STEF01 protects the load against over-current and over-voltage. The voltage is clamped to a user-defined maximum, preset with external resistors. Excessive current is restricted to the programmed safe limit by controlling the internal power MOSFET, and folds back to a lower limit if a strong over-current or short-circuit is detected.

The STEF01 leverages ST’s BCD8 high-voltage process to integrate value-added features, including dV/dt control to prevent excessive inrush current during startup or hot-swap insertion. This slows the output-voltage ramp-up time to at least 3ms, which can be increased if desired by connecting an external capacitor. Programmable Under-Voltage Lockout (UVLO), also set using external components, allows the user to fine-tune the desired voltage-rail minimum value to suit the load requirements.

Further features include thermal shutdown with latching or auto-retry, and maximum dissipated-power protection, which each prevent exceptionally high power from damaging the STEF01 when starting up into heavy capacitive loads, or during large load transients or short-circuits at high voltage. There is also a power-good indicator, and an enable/fault pin that can be used as either a status monitor or to control the device. A dedicated gate-driver output for controlling an external N-channel MOSFET simplifies implementation of reverse-current protection.

The STEF01 delivers flexible and convenient protection for a wide range of applications, including industrial hot-swap boards and control equipment, circuit breakers, power buses, security or lighting systems, telecom power modules, or distributed power systems.

The STEF01 is available now in 14-pin HTSSOP14 package, priced from $1.00 for orders of 1000 pieces.

For further information please log on : www.st.com/stef01-pr

ELE Times Research Desk
ELE Times Research Deskhttps://www.eletimes.ai
ELE Times provides a comprehensive global coverage of Electronics, Technology and the Market. In addition to providing in depth articles, ELE Times attracts the industry’s largest, qualified and highly engaged audiences, who appreciate our timely, relevant content and popular formats. ELE Times helps you build awareness, drive traffic, communicate your offerings to right audience, generate leads and sell your products better.

Related News

Must Read

Mission accomplished: Infineon technology proves reliable once again in space on Artemis II

Infineon's radiation-hardened semiconductors performed flawlessly on NASA's Artemis...

Bosch and Qualcomm expand collaboration to strategic ADAS solutions

Cockpit Computers: 10 million units delivered • High-performance solutions: Bosch...

Gartner Forecasts Worldwide Semiconductor Revenue to Exceed $1.3 Trillion in 2026

Semiconductor Revenue to Grow 64% in 2026 DRAM...

Directed Energy Systems: Where Capability Ends and Control Begins

by Sukhendu Deb Roy, Industry Consultant Key Takeaways The economics...

Boundary scan in combination with automotive applications for CAN-FD and LIN bus

Serial communication remains the backbone of electronic communication in...

Why Every EV & 5G Phone Could Soon Be Powered by Gujarat

In a move that cements India’s transition from a...

WSCAD ELECTRIX AI Cuts 50% Engineering Effort For Alligator Automations

Alligator Automations India Pvt. Ltd., a manufacturer of end-of-line...