HomeNewsIndia NewsWaste Glass Bottles to Power Electric Vehicles

Waste Glass Bottles to Power Electric Vehicles

Researchers at the University of California, Riverside’s Bourns College of Engineering have used waste glass bottles and a low-cost chemical process to create nanosilicon anodes for high-performance lithium-ion batteries. The batteries will extend the range of electric vehicles and plug-in hybrid electric vehicles, and provide more power with fewer charges to personal electronics like cell phones and laptops.

Titled “Silicon Derived from Glass Bottles as Anode Materials for Lithium Ion Full Cell Batteries,” an article describing the research was published in the Nature journal Scientific Reports. Cengiz Ozkan, professor of mechanical engineering, and Mihri Ozkan, professor of electrical engineering, led the project.

Even with today’s recycling programs, billions of glass bottles end up in landfills every year, prompting the researchers to ask whether silicon dioxide in waste beverage bottles could provide high purity silicon nanoparticles for lithium-ion batteries.

Silicon anodes can store up to 10 times more energy than conventional graphite anodes, but expansion and shrinkage during charge and discharge make them unstable. Downsizing silicon to the nanoscale has been shown to reduce this problem, and by combining an abundant and relatively pure form of silicon dioxide and a low-cost chemical reaction, the researchers created lithium-ion half-cell batteries that store almost four times more energy than conventional graphite anodes.

To create the anodes, the team used a three-step process that involved crushing and grinding the glass bottles into a fine white power, a magnesiothermic reduction to transform the silicon dioxide into nanostructured silicon, and coating the silicon nanoparticles with carbon to improve their stability and energy storage properties.

As expected, coin cell batteries made using the glass bottle-based silicon anodes greatly outperformed traditional batteries in laboratory tests. Carbon-coated glass derived-silicon (gSi@C) electrodes demonstrated excellent electrochemical performance with a capacity of ~1420 mAh/g at C/2 rate after 400 cycles.

Changling Li, a graduate student in materials science and engineering and lead author on the paper, said one glass bottle provides enough nanosilicon for hundreds of coin cell batteries or three-five pouch cell batteries.

“We started with a waste product that was headed for the landfill and created batteries that stored more energy, charged faster, and were more stable than commercial coin cell batteries. Hence, we have very promising candidates for next-generation lithium-ion batteries,” Li said.

This research is the latest in a series of projects led by Mihri and Cengiz Ozkan to create lithium-ion battery anodes from environmentally friendly materials. Previous research has focused on developing and testing anodes from portabella mushrooms, sand, and diatomaceous (fossil-rich) earth.

https://www.sciencedaily.com/releases/2017/04/170419112444.htm

ELE Times Bureau
ELE Times Bureauhttps://www.eletimes.ai/
ELE Times provides a comprehensive global coverage of Electronics, Technology and the Market. In addition to providing in depth articles, ELE Times attracts the industry’s largest, qualified and highly engaged audiences, who appreciate our timely, relevant content and popular formats. ELE Times helps you build awareness, drive traffic, communicate your offerings to right audience, generate leads and sell your products better.

Related News

Must Read

Bosch Accelerates Automation and Robotics Drive

Advance robotics and the dynamic growth of humanoid systems...

AI server Boards are Boosting at ASMPT SMT Solutions

Solutions, a global technology manufacturer of hardware and software....

Bosch Introduces Third-Gen Silicon Carbide Chips for EV

As India accelerates its transition to electric mobility, the...

Vishay Extends ILHB Ferrite Beads for Wider Automotive EMC Support

Vishay Intertechnology, Inc. announces an expansion of its ILHB...

Qorvo’s New Compact Front-End Redefines X-Band Radar Performance

Qorvo introduces an X-band radar front-end solution that enables...

STMicroelectronics Unveils Ultra-Precise Automotive IMU

The ASM330LHHG1 automotive qualifies as an Inertial Measurement Unit...

TI Launches a High-Cell-Count Battery Monitor featuring EIS

Engineers can build safer, higher-performing electric vehicles and energy...

DigiKey Expands Asian Electronics Industry with Launch of Vietnam Website

The localized website reinforces DigiKey’s commitment to supporting Vietnam’s...

Implantable and Non-Invasive Continuous Health Sensors

Continuous health monitoring is transforming modern medicine. Instead of...