HomeNewsIndia NewsManaging power made easy with the low power bridges with motor control

Managing power made easy with the low power bridges with motor control

In terms of revenue, the global low-power bridges market is estimated to expand at a CAGR of ~3% during the forecast period, owing to numerous factors, regarding which, study offers thorough insights and forecasts in its report on the global low-power bridges market.

Low-power operation of bridge circuits is becoming increasingly common. Several bridge-based transducers are low-impedance devices, which complicates the low-power design. The most obvious method to minimize bridge power consumption is to restrict drive to the bridge. Currently, UART, SPI, and I2C are the common hardware interfaces that people use for the development of microcontrollers. The IrDA interface makes wireless connectivity possible, so that the system can communicate with PDAs, consumer remote controls, and other wireless devices. The UART also features automatic hardware and software control, so that data flow can be regulated to prevent data overflow or loss of data.

Global Low-power Bridges Market: Dynamics

Surging demand for low-power bridges for use in various devices and various benefits offered by the same are some of the fundamental factors boosting the growth of the global low-power bridges market. Low-power bridges are extensively used in smartphones, tablets, and other mobile devices. Bridge ICs (I2C/SPI to UART/IrDA/GPIO) offer compact, low-power protocol converters for creating simpler and more flexible designs, while reducing the software overhead and time to market. These bridge solutions help designers easily combine multiple devices, incorporate new features, and seamlessly interface common communications protocols. Increase in the sales of smartphones and mobile devices is likely to drive the global market for low-power bridges during the forecast period. The sales of smartphones have been increasing at a rapid pace in developing countries such as India, Indonesia, Malaysia, and Brazil. I2C and SPI are the two widely used bus protocols in present-day embedded systems. The I2C bus has a minimum requirement for pin count, and hence, a smaller footprint on board. The SPI bus provides a synchronized serial link with performance within MHz range.

However, decline in the demand for consumer electronic devices is a key factor projected to hamper the growth of the global low-power bridges market during the forecast period.

Global Low-power Bridges Market: Prominent Regions

North America is a prominent market for low-power bridges. Growth of the low-power bridges market in the region can be attributed to considerably high investments in research & development activities by manufacturers operating in the region. Moreover, the rising adoption of low-power devices in developing economies in Asia Pacific led by technological advancements and cost efficiency of low-power bridges are driving the low-power bridges market in the region. Developing economies in the region are witnessing growth of the power industry. This, in turn, is boosting the overall demand for low-power bridges. Countries in the region are implementing low-power bridge technology by entering into various agreements and collaborations. Thus, the low-power bridges market in North America is witnessing consistent growth.

The low-power bridges market in Asia Pacific is estimated to expand significantly during the forecast period, owing to the presence of a large number of prominent players in the region, and continuous technological advancements. The low-power bridges market in the Middle East & Africa is expected to expand at a moderate pace in the near future, due to considerable investments in the power sector in these regions.

Global Low-power Bridges Market: Key Players

Key players operating in the global low-power bridges market are NXP Semiconductors, Diodes Incorporated, Cypress Semiconductor Corporation, Texas Instrument, Maxim Integrated, STMicroelectronics, Microchip Technology Inc., Toshiba Corporation, Nexperia, Maxlinear, Inc., Lattice Semiconductor, On Semiconductor, Semtech Corp., Silicon Laboratories, and Analog Devices, Inc.

In February 2019, Nexperia is planning to introduce new products with low-power bridge technology in the market, and increase its annual manufacturing capacity to more than 100 billion parts.

Click here for more information 

ELE Times Research Desk
ELE Times Research Deskhttps://www.eletimes.ai
ELE Times provides a comprehensive global coverage of Electronics, Technology and the Market. In addition to providing in depth articles, ELE Times attracts the industry’s largest, qualified and highly engaged audiences, who appreciate our timely, relevant content and popular formats. ELE Times helps you build awareness, drive traffic, communicate your offerings to right audience, generate leads and sell your products better.

Related News

Must Read

Collins Aerospace Breaks Ground on New Propeller MRO Facility in Bengaluru

Multi-Million-Dollar Investment will Strengthen Engineering and Manufacturing Capabilities for...

Quest Global Earns Leader Recognition in Automotive, Autonomous Systems and SDV Services

Recognition Covers Autonomous Systems, Automotive Services, and Engineering and...

Rohde & Schwarz Validates ASA-ML Communication Between Microchip and NXP Automotive Devices

Rohde & Schwarz Japan connected ASA-ML-compatible evaluation boards from...

Murata Introduces MGJ2T2 Isolated DC-DC Converters for High-Voltage SiC Gate Drives

Murata Manufacturing Co., Ltd. has introduced the MGJ2T2 series...

CATL Explores Lithium-Air Battery Technology to Advance Next-Generation Electric Vehicles

​CATL, the world’s largest manufacturer of energy storage batteries,...

KAIST Develops Semiconductor-Based Interface Technology to Extend Anode-Free EV Battery Life

Researchers from the Korea Advanced Institute of Science and...

Quest Global Acquires Tests Assured to Strengthen Wearable Technology Engineering and Testing Capabilities

The acquisition aims to expand Quest Global’s engineering capabilities...

Murata Introduces SCI36LT Intelligent IMU with Integrated MEMS Sensors and Embedded Processor

Murata Manufacturing Co., Ltd. has introduced the SCI36LT Series,...

Top 10 Advanced IC Substrate Manufacturers in 2026: Leading Companies Powering the AI Semiconductor Revolution

A combination of Artificial Intelligence (AI), High-Performance Computing (HPC),...