HomeLatest ProductsNew ProductsPosifa Technologies Introduces PVC4001-C MEMS Pirani Vacuum Transducer for Wide-Range Vacuum Measurement

Posifa Technologies Introduces PVC4001-C MEMS Pirani Vacuum Transducer for Wide-Range Vacuum Measurement

Posifa Technologies has introduced its new PVC4001-C MEMS Pirani vacuum transducer, the latest device in the company’s PVC4000 series. Designed for cost-effective OEM integration, the transducer combines a MEMS thermal conduction sensor, measurement electronics, a microprocessor, and an onboard barometric pressure sensor in an ultra-compact PCB assembly with a connector-terminated wire harness.

Based on Posifa’s second-generation MEMS thermal conduction chip, the PVC4001-C operates on the principle that the thermal conductivity of gases is proportional to vacuum pressure. Its electronics and microprocessor amplify and digitise the sensor signal and provide output via an I²C interface. For applications requiring calibrated output, users can enter up to 10 pairs of calibration points, which are used by a built-in piecewise linearization algorithm.

The PVC4001-C is designed to deliver stable performance across changing operating conditions. A built-in temperature sensor supports a temperature compensation algorithm to offset changes in thermal conductivity caused by ambient temperature variation. In addition, a pulsed excitation scheme — in which the sensor is heated for about 100 ms and then turned off for one second — helps minimise drift due to self-heating in high vacuum, while also reducing power consumption for battery-powered instruments.

The device provides a measurement range from 0.001 Torr to 900 Torr (1.3*10-4 kPa to 120 kPa) with a response time of less than 200 ms. Because Pirani vacuum sensors typically lose resolution above 10 Torr, the PVC4001-C adds an onboard barometric pressure sensor that supports measurement from 10 Torr to 760 Torr with 5 % accuracy across that extended range. This combination makes the device especially well-suited for portable digital vacuum gauges and for leak detection in closed systems maintained under primary vacuum, including vacuum-insulated panels.

Additional features of the PVC4001-C include low power consumption, resistance to contamination, and an operating temperature range of -25 °C to +85 °C.

ELE Times News
ELE Times Newshttps://www.eletimes.ai/
ELE Times provides extensive global coverage of Electronics, Technology, and the Market. In addition to providing in-depth articles, ELE Times attracts the industry’s largest, qualified, and highly engaged audiences, who appreciate our timely, relevant content and popular formats. ELE Times helps you build experience, drive traffic, communicate your contributions to the right audience, generate leads, and market your products favorably.

Related News

Must Read

Bosch Accelerates Automation and Robotics Drive

Advance robotics and the dynamic growth of humanoid systems...

AI server Boards are Boosting at ASMPT SMT Solutions

Solutions, a global technology manufacturer of hardware and software....

Bosch Introduces Third-Gen Silicon Carbide Chips for EV

As India accelerates its transition to electric mobility, the...

Vishay Extends ILHB Ferrite Beads for Wider Automotive EMC Support

Vishay Intertechnology, Inc. announces an expansion of its ILHB...

Qorvo’s New Compact Front-End Redefines X-Band Radar Performance

Qorvo introduces an X-band radar front-end solution that enables...

STMicroelectronics Unveils Ultra-Precise Automotive IMU

The ASM330LHHG1 automotive qualifies as an Inertial Measurement Unit...

TI Launches a High-Cell-Count Battery Monitor featuring EIS

Engineers can build safer, higher-performing electric vehicles and energy...

DigiKey Expands Asian Electronics Industry with Launch of Vietnam Website

The localized website reinforces DigiKey’s commitment to supporting Vietnam’s...

Implantable and Non-Invasive Continuous Health Sensors

Continuous health monitoring is transforming modern medicine. Instead of...